The body consists of a hood & 2 side panels and is available in 16 solid gel-coat colors.

The 3 piece Sand Rail Bodies are available for: Warrior, 295, 2100 and 4105

Mounting hardware is not included with the body. Multiple mounting choices are featured below.

Grinding is required to fit the pieces together and to the chassis.

It is very difficult to adequately display colors on the web due to differences in monitors. Our gel-coat supplier does have an online color chart & we've provided a link to it below, but you should be aware that the colors appear darker than they actually are.

The Valspar website displays more colors than we normaly use & we do not always refer to them by the same name, but I've listed their color numbers with the color names we use below.

White	5W-1	Black	N/A
Canary Yellow	5L-27	Golden Yellow	5L-55
Lime Green	5G-28	Forest Green	5G-51
Aqua	5A-18	Med. Blue	5A-16
Dark Blue	5A-17	Teal	5A-19
Orange	5N-12	Bubble Gum Pink	5R-24
Red	5R-14	Maroon	5R-15
Purple	5R-44	Boysenberry	5R-26

Any of the above colors are available at no additional charge.

Other Valspar colors can be special ordered, but there may be an extra charge.

You can weld tabs to the frame and bolt the panels in place or use these special fasteners.


#5518-10 Dzus Self-Ejecting Stud	#5518-12 Dzus Tab	#5518-16 Dzus Thumb Twist Stud
$5.98 each	$1.98 each	$6.49 each
$37.5 for a 10 pack	$15.49 for a 10 pack	$59.50 for a 10 pack

The answer for attaching any panel is Dzus fasteners. Spring loaded self-ejecting stud eliminates attaching hassles forever. Patented design affords a clean neat appearance.

Once the Dzus tabs are welded to your chassis, you can use either style of stud to attach your body panels.

The 5518-10 stud is recessed & flat when closed & can be easily turned with a slotted screwdriver. The Thumb Twist Stud has a wing nut style part that protrudes from the surface & can be opened or closed without any tools.


Rubber Hood Hold Downs	Chrome Hood Hold Downs
$8.98 a pair	$19.98 a pair

These fasteners, hold your hood securely down & can be fastened quickly. You can use either style with confidence.

The rubber ones are strong & cannot scratch the finish of whatever you use them on. They are the highest quality units available on the market & will not break or rot as do many others.

The chrome finished ones feature all steel & tough spring loaded construction. They are excellent for securing body panels, tool boxes, emergency kits, etc.

If you've aleady painted your frame & want an option for mounting body panels that doesn't require any welding, you can use these rubber coated clamps.

The clamp is made to fit 1 1/2" tubing & has a mounting hole for a 1/4" screw or bolt.