|
Trike Bodies
Desperado trike body $580.00
The Desperado trike body features molded seats for both the driver and passenger.
The back of the body covers the motor. This body does not provide any rear tire coverage.
There is no hardware provided with this body, as most frames are custom built & will have unique mounting points.
The dimensions below are given, for rough planning purposes only. We strongly recommend that you purchase the body before designing your trike frame.
The overall length of the Deperado body is 85 1/2 inches. The width at the widest point is 40 1/2 inches.
Berrien Buggy is not aware of any source for pre-made seats to fit this body.
Available in the same 16 beautiful gel-coat colors as our other fiberglass bodies.
It is very difficult to adequately display colors on the web due to differences in monitors. Our gel-coat supplier does have an online color chart & we've provided a link to it below, but you should be aware that the colors appear darker than they actually are.
The Valspar website displays more colors than we normaly use & we do not always refer to them by the same name, but I've listed their color numbers with the color names we use below.
White
|
5W-1
|
 |
Black
|
N/A
|
Canary Yellow
|
5L-27
|
 |
Golden Yellow
|
5L-55
|
Lime Green
|
5G-28
|
 |
Forest Green
|
5G-51
|
Aqua
|
5A-18
|
 |
Med. Blue
|
5A-16
|
Dark Blue
|
5A-17
|
 |
Teal
|
5A-19
|
Orange
|
5N-12
|
 |
Bubble Gum Pink
|
5R-24
|
Red
|
5R-14
|
 |
Maroon
|
5R-15
|
Purple
|
5R-44
|
 |
Boysenberry
|
5R-26
|
Any of the above colors are available at no additional charge.
Other Valspar colors can be special ordered, but there may be an extra charge.
Maverick trike body $475.00
The Maverick trike body provides a molded rear seat, covers the motor and the fenders are big enough for wide tires. A seperate driver seat is required.
There is no hardware provided with this body, as most frames are custom built & will have unique mounting points. The lower front part of this body was made to fit the tunnel of a stock VW Beetle pan.
The dimensions below are given, for rough planning purposes only. We strongly recommend that you purchase the body before designing your trike frame.
The overall width of this body at the fenders is 69 inches. The overall length is 50 inches. The seat width is 31 inches.
Berrien Buggy is not aware of any source for pre-made seats to fit this body.
Available in the same 16 beautiful gel-coat colors as our other fiberglass bodies.
It is very difficult to adequately display colors on the web due to differences in monitors. Our gel-coat supplier does have an online color chart & we've provided a link to it below, but you should be aware that the colors appear darker than they actually are.
The Valspar website displays more colors than we normaly use & we do not always refer to them by the same name, but I've listed their color numbers with the color names we use below.
White
|
5W-1
|
 |
Black
|
N/A
|
Canary Yellow
|
5L-27
|
 |
Golden Yellow
|
5L-55
|
Lime Green
|
5G-28
|
 |
Forest Green
|
5G-51
|
Aqua
|
5A-18
|
 |
Med. Blue
|
5A-16
|
Dark Blue
|
5A-17
|
 |
Teal
|
5A-19
|
Orange
|
5N-12
|
 |
Bubble Gum Pink
|
5R-24
|
Red
|
5R-14
|
 |
Maroon
|
5R-15
|
Purple
|
5R-44
|
 |
Boysenberry
|
5R-26
|
Any of the above colors are available at no additional charge.
Other Valspar colors can be special ordered, but there may be an extra charge.
Berrien Buggy is no longer offering a Trike Frame
|