The Desperado trike body features molded seats for both the driver and passenger.

The back of the body covers the motor. This body does not provide any rear tire coverage.

There is no hardware provided with this body, as most frames are custom built & will have unique mounting points.

The dimensions below are given, for rough planning purposes only. We strongly recommend that you purchase the body before designing your trike frame.

The overall length of the Deperado body is 85 1/2 inches. The width at the widest point is 40 1/2 inches.

Berrien Buggy is not aware of any source for pre-made seats to fit this body.

Available in the same 16 beautiful gel-coat colors as our other fiberglass bodies.

It is very difficult to adequately display colors on the web due to differences in monitors. Our gel-coat supplier does have an online color chart & we've provided a link to it below, but you should be aware that the colors appear darker than they actually are.

The Valspar website displays more colors than we normaly use & we do not always refer to them by the same name, but I've listed their color numbers with the color names we use below.

White	5W-1	Black	N/A
Canary Yellow	5L-27	Golden Yellow	5L-55
Lime Green	5G-28	Forest Green	5G-51
Aqua	5A-18	Med. Blue	5A-16
Dark Blue	5A-17	Teal	5A-19
Orange	5N-12	Bubble Gum Pink	5R-24
Red	5R-14	Maroon	5R-15
Purple	5R-44	Boysenberry	5R-26

Any of the above colors are available at no additional charge.

Other Valspar colors can be special ordered, but there may be an extra charge.

The Maverick trike body provides a molded rear seat, covers the motor and the fenders are big enough for wide tires. A seperate driver seat is required.

There is no hardware provided with this body, as most frames are custom built & will have unique mounting points. The lower front part of this body was made to fit the tunnel of a stock VW Beetle pan.