|
Hood & Dash Accessories
Hood & Dash Accessories
Directory for this page
Dune Buggy Windshield
Aluminum windshield with AS-1 safety glass
$225.99
We offer aluminum windshield frames with AS-1 safety glass for all our fiberglass bodies. All frames are a polished and anodized aluminum extrusion.
The windshield is pre-assembled, with 16" tall glass, mounting rubber and glazing vinyl.
The size we stock for our Nostalgia & Lancer body is 42 1/4" dash width.
The size we stock for our Roadster-T body is 38" dash width.
Specify body model & dash width when ordering.
Other windshield sizes can be special ordered.
Although we do everything we can to ensure that our windshields have adequate packaging to prevent breakage, occasionally windshields do get broken in shipment, so value insurance is manditory on all windshields that we ship.
Windshield Accessories
Add a little style to your buggy with our bolt on wind wings and windshield mount mirrors.
The brackets are CNC milled of polished aluminum and bolt easily onto our aluminum windshield frame.
Wind Wings
Rectangular Glass Wind Wings, pair
$250.00 Wind Wings, pair any style
The wind wings are made of tempered glass & come in three styles:
#10105 ~ rectangular clear glass (pictured)
#10106 ~ tapered clear glass (not pictured)
#10107 ~ tapered tinted acrylic (not pictured).
Clamp-on Mirrors
Angle Armed Clamp-on Side Mirror
$34.00 each
for either shape
The arms are cast aluminum with a chrome finish. Aluminum mounting brackets are included. The mirror heads are reversable, so both styles can be used on either the drivers or passengers side of the windshield frame.
These clamp-on mirrors are available in two shapes:
#10302 ~ 2 1/4" x 4 1/2" rectangular head (pictured)
#10304 ~ 2 1/2" x 5" oval head (not pictured)
|
|
|
Round Straight Arm Clamp-on Side Mirror #10101
|
Rectangular Straight Arm Clamp-on Side Mirror #10102
|
$70.00 each
|
$70.00 each
|
These billet aluminum clamp-on mirrors have straight arms. The arms are billet aluminum as are the heads & included mounting brackets. Both styles of mirrors are universal & can be installed on either the drivers or passengers side of the windshield frame.
The mirrors are available in two shapes:
#10101 ~ 4" round
#10102 ~ 2 1/2" x 5" rectangle
Clamp-on Rearview Mirror
#10104
$75.00
Want a rearview mirror that clamps to the top of your windshield? This 2" x 5" rectangular mirror, does just that & offers 36 degrees of adjustment in all directions for maximum visibility.
Glue-On Mirrors
Glue-on Rearview Mirror
#10301
$20.00
No special brackets required, this mirror glues to your windshield just like current production car mirrors do. The mirror face measures 5 3/8" x 2 1/4".
NOTE: This mirror has a maximum adjustment of 16 º. It does not have enough adjustment for our Nostalgia or Lancer bodies, but will work with the Roadster-T which has a more straight up style windshield.
Glue-on Rearview Mirror
#10103
$45.00
This billet aluminum glue-on mirror with a 5" x 2" mirror face that offers a 36 º range of adjustment, which should be enough for most buggies.
Steering Column Support & Windshield Installation Kit
$66.43
Berrien's Steering Column Support & Windshield Installation kit, comes with all the instructions & hardware needed to support a steering column, wiper motor & securely install a dune buggy windshield.
The steering column support bar is adjustable, so it will fit most Manx-style fiberglass buggy bodies.
Please specify if your buggy is left or right hand drive when ordering.
NOTE: This kit does not work with our Roadster-T or other T-style bodies.
Aluminum Dash Panels
Lazer-cut Aluminum Dash Panels
$49.99
Made to fit the tear drop shape of the Nostalgia & Citation dash, these lazer-cut aluminum dash panels can be ordered in three configurations:
two 3 1/8" VDO gauges, four 2 1/16" VDO gauges & ignition(top)
stock VW speedometer, four 2 1/16" VDO gauges & ignition (bottom)
without any gauge holes (not shown)
All dashes come with mounting holes, stainless steel button head allen bolts & nylock nuts for mounting to your fiberglass dash.
Stainless Steel Fuel Filler Kit
Polished Stainless Steel Fuel Filler with screw on vented cap
$29.99
Fuel Filler kit includes 2 hose clamps, a section of gas resistant hose and a piece of tube to weld to tank.
|