|
Fiberglass Body Accessories
Fiberglass Body Accessories
Directory for this page
Side Panels
|
|
|
Bubble Side Panels
|
Flat Side Panels
|
$242.00 a pair
|
$191.78 a pair
|
Both are shown in red
Give your fiberglass buggy a finished look with our bubble or flat side panels.
The bubble side panels are contoured to match the wrap over edge of our Nostalgia body or an original Meyer's Manx.
Due to the subtle differences in many bodies and the difficulty in accurately measuring contours, there is no way for us to know if our bubble side panels will fit other fiberglass bodies, without actually holding them up to the body.
The flat side panels were made for our Citation body, but they can be trimmed to fit most any body made for a stock Beetle pan that has been shortened 14 1/2".
Both styles are available in the same 16 beautiful gel-coat colors as our fiberglass bodies.
White
|
 |
Black
|
Canary Yellow
|
 |
Golden Yellow
|
Lime Green
|
 |
Forest Green
|
Aqua
|
 |
Med. Blue
|
Dark Blue
|
 |
Teal
|
Orange
|
 |
Bubble Gum Pink
|
Red
|
 |
Maroon
|
Purple
|
 |
Boysenberry
|
Any of the above colors are available at no additional charge.
In order to guarantee color match, all fiberglass needs to be ordered at the same time.
4-Passenger Hardtop
4-Passenger Hardtop above shown in red with optional windows and chrome jiffy trim.
Expand your buggying season with our 4-Passenger hardtop.
$495.88
|
|
Charges for optional windows, factory installed are listed below
|
$106.19
|
Oval Rear Window Installed
|
$132.43
|
Pair of 6" Porthole side windows installed
|
Charges for optional windows, for you to install are listed below
|
$46.19
|
Oval Rear Window with hardware
|
$72.43
|
Pair of 6" Porthole side windows with hardware
|
Fits the Nostalgia and Citation bodies as well as an original Manx.
Due to the subtle differences in many bodies and the difficulty in accurately measuring contours, there is no way for us to know if our top will fit other fiberglass bodies, without actually setting a top on the body.
Available in the same 16 beautiful gel-coat colors as our fiberglass bodies.
White
|
 |
Black
|
Canary Yellow
|
 |
Golden Yellow
|
Lime Green
|
 |
Forest Green
|
Aqua
|
 |
Med. Blue
|
Dark Blue
|
 |
Teal
|
Orange
|
 |
Bubble Gum Pink
|
Red
|
 |
Maroon
|
Purple
|
 |
Boysenberry
|
Any of the above colors are available at no additional charge.
In order to guarantee color match, all fiberglass needs to be ordered at the same time.
Jiffy trim
This rubber based trim gives a finished look to the rough edge of any fiberglass body & helps protect against chipping. It's available in either plain black or black with a chrome accent strip.
$2.85 per foot
|
Black with chrome strip
|
$2.25 per foot
|
Black
|
Approximately footage requirements for our fiberglass products:
22 1/2 feet - Hardtop
28 feet - Nostalgia or Citation body
36 1/2 feet - Lancer body
41 1/2 feet - Roadster-T body
Fiberglass products vary in thickness & in order for the metal core of jiffy trim to grip properly, the edge it's being installed on needs to be between 1/8" & 3/16" thick. This generally means that quite a bit of grinding is required before the trim can be installed.
If you order a body or hardtop from us, you can have us install the trim for you.
The labor fee to prep the body & install the trim is:
$100 for the 4-passenger Hardtop
$100 for a Nostalgia, Citation or Lancer Body
$200 for a Roadster-T body
Belly Pan Gasket
$18.98
The custom molded rubber design of this gasket provides a water-tight seal. Normally installs between VW belly pan and body, but can be useful in other applications because of it's cushion design. Packaged in 19' length for complete installation.
|