Aluminum Floor, Steering & Passenger Accessories
Aluminum Floor, Steering & Passenger Accessories
Directory for this page
Steering Accessories
|
|
|
Self-Aligning Steering Bearing
|
Steering Bearing Mount
|
$30.17
|
$3.93
|
Our self-aligning steering bearing features a 1" ID pivotal bearing with a 7/8" bronze bushing. Because no two shafts are exactly the same & paint or chrome will add to the outer dimension, the bronze bushing will require honing.
Our steering bearing mount, welds to the dashbar and is made to accept the self-aligning steering bearing. It comes standard with all LKT & LCWT sandrail models. It is an option for the Warrior & Cruiser Knockdown kits.
Steering Shaft
$20.34 raw steel
$47.98 chrome
Our Steering shaft is made of a 5' piece of 7/8" O.D. tubing with a 3-bolt flange welded on one end. Just cut it to length and bolt it in place. Available in raw steel or chrome finish.
$38.82 raw steel shaft with quick disconnect
Aluminum Floor
Full-length Aluminum Diamond Tread Plate Floor
$300.00
We offer a full-length floor for all of our chassis, made of 1/8" polished aluminum diamond tread plate and sheared to fit .
NOTE: Floor is sheared from 4' wide sheet of aluminum & will have a small gap on each side at the bend in the outer floor rails.
When ordering, please specify your chassis model.
Windshield Rubber
$27.98
When installing a windshield on a tubular chassis use this weatherproof glazing rubber. It is designed to contour the tubing & firmly hold glass up to 3/8" thick. Convert your off-road chassis to an all weather or street legal vehicle with this kit. Comes in one 12 ft length for custom installation. Adhesive not included.
Passenger Accessories
|
|
|
Foot Rest
|
Grab Bar
|
$12.10 raw steel
|
$11.55 raw steel
|
$29.98 for either in chrome
If your passenger thinks your driving is too wild, they will appreciate something to brace their feet against or hold onto during the ride.
Designed to be welded on, the foot rest and grab bar are available in either raw steel or chrome finish.
Colored Roll Bar Padding
|
|
|
|
|
|
#16-2090-0
Yellow
|
#16-2091-0
Red
|
#16-2092-0
Blue
|
#16-2094-0
Purple
|
#16-2096-0
Black
|
$5.00 each
Offset hole location allows padding to be positioned to provide more portection for driver/passengers. Padding constructed of closed-cell foam. Each length is 3 feet with 1 1/2" ID hole.
