|
Pedals & Accessories
Pedals & Accessories
Directory for this page
CNC Hydraulic Pedal Assemblies
CNC Hydraulic Pedal Package 2 Wheel Brakes - Floor Mount
SERIES 112
$264.00 for Black Pedals
$293.00 for Chrome Pedals
This hydraulic pedal package is designed for use with a conventional cable, not hydraulic throttle. Popular with sand cars with rear wheel brakes only. Hydraulic clutch slave cylinder is included. Lightweight but strong aluminum casting. Includes fittings for Metric brake lines. All CNC pedal assemblies feature Sure-grip foot pads and Total-seal rubber boots. Cable Bracket included.
 Slave cylinder is anodized in Red, Blue or Polished
 Pedals arms are available in Black or Chrome
Please specify colors for pedal arms & slave cylinder when ordering.
|
If you prefer the feel of a full pedal under your foot, try an Aluminum Gas Pedal with your CNC pedal set.
CNC Hydraulic Pedal Package 4 Wheel Brakes - Floor Mount
shown with Slave Cylinder
SERIES 114
$299.00 for Black Pedals
$329.00 for Chrome Pedals
This hydraulic pedal package for cable throttle is designed for use with
a conventional cable, not hydraulic throttle. Popular with sand cars
with 4 wheel brakes. Hydraulic clutch slave cylinder is included.
Lightweight but strong aluminum casting. Includes fittings for Metric
brake lines. All CNC pedal assemblies feature Sure-grip foot
pads and Total-seal rubber boots. Cable bracket included.
 Slave cylinder is anodized in Red, Blue or Polished
 Pedals arms are available in Black or Chrome
Please specify colors for pedal arms & slave cylinder when ordering.
If you prefer the feel of a full pedal under your foot, try an Aluminum Gas Pedal with your CNC pedal set.
CNC Aluminum Gas Pedals
|
|
|
|
#170 - Side Mount
|
#171 - Back Mount
|
#172 - Footrest
|
 Built in return spring.
 Top quality casting.
 Non skid surface.
 Lightweight but high strength.
 Adjustable forward and rear travel stops.
 10-32 thread.
 7 3/4" overall height.
|
 Built in return spring.
 Top quality casting.
 Non skid surface.
 Lightweight but high strength.
 Adjustable forward and rear travel stops.
 7 3/4" overall height.
|
 Built in return spring.
 Top quality casting.
 Non skid surface.
 Lightweight but high strength.
 Adjustable forward and rear travel stops.
 Side footrest.
 8 1/4" overall height.
|
$39.00
|
$39.00
|
$44.00
|
Throttle Cables
Stock VW Throttle Cables
|
|
#111.721.555C
Type 1 61-66
104.33" long
|
|
|
#111.721.555E
Type 1 67-71
103.43" long
|
|
|
#112.721.555
Type 1 72-74
104.33" long
|
$3.99 each
If ordering a stock cable for use in a Beetle or other application where the cable will not be shortened, specify the year you need.
Other Throttle Cables
#5510-20 Universal Throttle Cable
$7.50
This universal throttle cable is REALLY universal. Cable is of sufficient length to handle all applications & the unique design allows you to cut off the style end you don't need when you determine the appropriate length. Kit includes carb end throttle cable adapter (same as in throttle cable shortening kit shown below) to complete the installation. A must for every tool box. Fits all years of aircooled Volkswagen Beetle pedals.
#5510-10 Racing Throttle Cable
$16.50
Super heavy duty stainless steel 1/8" throttle cable. Virtually indestructible. Eleven foot length is sufficient to satisfy all custom installations. Requires throttle cable shortening kit shown below.
#5509-11 Throttle Cable Kit with Roller Pedal
$23.50
This kit solves throttle cable problems forever. Kit includes eleven feet of extra heavy 3/32" stainless steel throttle cable with special end attached, black roller pedal and enough tubing and special clamps to complete any installation. May require throttle cable shortening kit shown below.
The throttle cable kit is also available without a roller pedal
#5509-10 Throttle Cable Kit
$17.98
Roller Pedals
#5508
Black Plastic
|
$5.50
|
#00-8511-0
Billet Aluminum
|
$21.90
|
Roller Pedals not only look trick, they make for smoother acceleration...especially on rough roads and freeways. A must for off-road. Choose from black plastic or Billet aluminum roller on a chrome bracket. Fits all years of aircooled Volkswagen Beetle pedals.
#00-3167-0 Cable Shortening Kit
$7.00
Whether you are using the original throttle cable from a donor Volkswagen Beetle when building a buggy or you buy a new one, it is likely to be longer than you need it to be. The cable shortening kit shown above includes an adjustable fitting end for the throttle cable as well as the cables for the emergency brake & clutch.
If you don't need to shorten all three types of cables, seperate kits are also available.
#00-3168-0 Clutch Cable Shortening Kit
|
$2.80
|
#00-3169-0 Emergency Brake Cable Shortening Kit
|
$5.60
|
#00-3170-0 Throttle Cable Shortening Kit
|
$1.40
|
#00-3171-0 Throttle Cable Extender
$2.98
Changing carburetors may also change the location of the throttle assembly. If that happens to you & your cable is not quite long enough to reach, this extender will increase your cable length by approximately 1 1/2". Kit comes with throttle extender & cable lock.
CNC Cutting Brakes
Single Handle Cutting Brake with Angled or Straight Handle
Dual Handle Cutting Brake with Angled or Straight Handles
$142.00 for any series, bore size or color
SERIES 422A Single Angle Handle
SERIES 422S Single Straight Handle
SERIES 452A Dual Angle Handles
SERIES 452S Dual Straight Handles
All Cutting Brakes feature:
 Total-seal rubber boots.
 Available in 5/8" or 3/4" bore sizes.
 Blue, red or Silver anodized aluminum knobs.
 Chrome handle.
Please specify series, bore size & color for knob when ordering.
CNC Master Cylinders
Need to repair your hydraulic pedal assembly or creating your own custom brake system?
Consider these high quality master cylinders.
Round Master Cylinder
SERIES 701
$59.00 for either bore size
 2 1/4" Mounting pattern.
 Available in 5/8" or 3/4" bore sizes.
 5/16-24 thread push rod.
 1/8" pipe thread outlet.
 Total-seal rubber boots.
 Screw on lid with diaphragm.
 Overall height is 3".
 Precision American alloy casting.
Please specify bore size when ordering.
Also available with a Metric fitting & anodized clevis in Red, Blue or Silver
Please specify bore size & color of clevis when ordering.
$61.00 for either bore size w/fitting & clevis
Short Master Cylinder
SERIES 702
$71.00 for either bore size
Same as the round master cylinder above, but with a larger reservoir.
 2 1/4" Mounting pattern.
 Available in 5/8" or 3/4" bore sizes.
 5/16-24 thread push rod.
 1/8" pipe thread outlet.
 Total-seal rubber boots.
 Non-corrosive piston.
 Equipped with stainless steel sleeve
 Overall height is 3".
Please specify bore size when ordering.
Also available with a Metric fitting & anodized clevis in Red, Blue or Silver
Please specify bore size & color of clevis when ordering.
$73.00 for either bore size w/fitting & clevis
CNC Slave Cylinder
Pull Style Slave Cylinder
$56.00
 Non-corrosive piston.
 Total-seal rubber boot.
 Equipped with Metric brake line fitting.
 Non-corrosive piston.
 Fully adjustable.
 Easily interchangeable pressure line fittings.
 Available in red, blue or silver anodized finish.
Please specify color when ordering.
Stock VW Pedals
#113.798.900 Stock Pedal Assembly
$99.90
Put an end to those annoying pedal problems, whether they are sticking or completely missing, with this stock pedal assembly for brake & clutch. Can be completed with either a roller pedal or a stock style accelerator pedal repair kit.
Accelerator Pedal Repair Kit
#113.798.507 Accelerator Pedal Repair Kit
$20.30 each
This kit can not only repair a damaged accelerator pedal on the pedal set in your bug or buggy, it can also be used to complete a brand new pedal assembly if you don't have an old set to repair. Comes complete with a stock throttle pedal, rubber pad & attaching hardware.
#311.721.173A Brake/Clutch Pedal Pad
$1.20 each
Replace your worn or missing brake/clutch pedal pads with new rubber ones.
Custom Pedal Covers
00-4550-0
|
Brake & Clutch Pedal Covers
|
$10.50
|
00-4551-0
|
Brake, Clutch & Gas Pedal Covers
|
$5.90
|
00-4552-0
|
Gas Pedal Cover
|
$5.50
|
Really dress up your interior with these custom chrome & rubber pedal covers.
Fits all years of VW's with flat gas pedals.
Stock VW Clutch Cables
#113.721.335A
|
Type 1 to '71
|
#111.721.335C
|
Type 1 72-74
|
#111.721.335E
|
Type 1 75-79
|
$3.99 each
If ordering a stock cable for use in a Beetle or other application where the cable will not be shortened, specify the year you need.
#131.721.349 Clutch Cable Wing Nut
$1.60 each
Using a new nut can make replacing the clutch cable an easier, faster project.
Not needed if you have to shorten your clutch cable.
|