Accessory Installation Prices
Installation on a number of our sandrail accessories is possible on
Aluminum Floor
Includes a universal tab welded every 10-12 inches along the inside of the outer floor rails & outside of the center floor rails, drilling & attaching the floor with bolts & nylock nuts
Installation on an LCWT 2-seat sandrail chassis $96.95
Installation on an LCWT 4-seat sandrail chassis $116.95
Battery Box
Installation on any LCWT sandrail or square tube chassis $10.00
Chassis Brace Kit
Installation in any LCW or LCWT sandrail chassis $50.00
Double Bar Bumper
Welding stubs to the end of the armrail & bumper to lower front clamps
Installation on any LCW or LCWT sandrail chassis $30.00
Single bar bumpers are never factory installed, since the stubs must be welded onto the shock towers of the front beam, not to the chassis.
Double Headbar Kit
Classic 290, 295, 2100, 4105, Sandfox or Sandfox 4X
Installation in any of the above LKT (Top & Bottom only), LCW or LCWT sandrail chassis $50.00
Pick-up Style Rear Cage Kit
Classic 290, 295, 2100, 4105, Sandfox or Sandfox 4X
Installation in any of the above LKT (Top & Bottom only), LCW or LCWT sandrail chassis $60.00
Treebars
Installation of double bend treebars on any LCW or LCWT sandrail chassis $30.00
Installation of triple bend treebars on any LCW or LCWT sandrail chassis $60.00
Tubular Frame Horns
Installation on a custom torsion $50.00
Installation on a stock torsion $110.00
Installation charge waived if frame horns & custom torsion are being installed together in a new LCWT chassis
Installation on a stock torsion includes removal of old frame horns and clean-up & repair of IRS trailing arm clips and welding on the new tubular frame horns.
